 |
|
|
|
 |
|
|
| |
 ACCROLUBE® |
|
| |
|
 Finally, a high efficiency grease that
outperforms the others. Each ACCROLUBE® specialty lubricant is designed for specific
applications. We can also custom formulate a lubricant
to fit your particular need. If you have a requirement
you would like to discuss, please fill out the form on the contact us page and one of our technical sales professionals will contact you to discuss your application.
To learn more about our
grease products, click on one of the links below.
|
| |
|
| |
 |
ACCROLUBE® |
| |
High efficiency, petroleum
based grease fortified with PTFE. When applied
to a metallic surface, a fine protective
and lubricating film is created. It is virtually
unaffected by corrosive moisture and will
not migrate from hot surfaces. |
| |
|
|
ACCROLUBE® -
FG |
| |
Multi-service,
non-melting, waterproof grease fortified
with PTFE. It is designed specifically to
lubricate, seal out water, and resist chemical
attack under the most demanding conditions.
ACCROLUBE® - FG is a synthetic based
lubricant that is U.S.D.A. H-1 rated and
KOSHER approved; which gives it full acceptability
for use in all areas where incidental food
contact may occur. |
| |
|
|
 |
|
| |
|
ACCROLUBE® MG |
| |
Premium quality synthetic
high temperature grease fortified with molybdenum
disulfide (moly). It creates a boundary lubricating
film that reduces wear between metal surfaces
and protects against corrosion. Because of its
high film strength, anti-wear action and load
carrying capabilities, it may be utilized in
a wide variety of applications under severe high
and low temperatures. |
| |
|
|
ACCROLUBE® MARINE 2000 |
| |
 Forms a fine protective and lubricating film when applied to a metallic surface. It is virtually unaffected by corrosive moisture and will not migrate from hot surfaces.
ACCROLUBE® MARINE 2000 resists oil separation, is water resistant, stable at high temperatures, and is chemically and mechanically stable. |
| |
|
|
ACCROLUBE® 230
SILICONE |
| |
Non-hardening
silicone used primarily as a valve and o-ring
lubricant and sealant. It exhibits excellent
dielectric properties, physical and thermal stability.
It is USDA H-1 rated, which gives it full acceptability
for use in all areas where incidental food contact
may occur.
It will not carbonize at high temperatures. It is insoluble in water, methanol,
ethanol, acetone, glycol, glycerin, vegetables and mineral oils. |
| |
|
|
ACCROLUBE® Grease Private Label |
| |
 All ACCROLUBE® grease products can now be custom packaged with your name and information to include in your repair kits. Poly Tubes and Easy Squeeze Lube Packs make lubricating replacement parts easy and efficient for your customer, plus they are using the grease you recommend. These products are available in 2cc to 1.5 oz. Tubes and 2 gram to 2.5 oz. lube packs. |
|
|
|
| |
|
|
| |
CONTACT
US |
|
| |
|
For more information on Accrolube® or any of our
products or services, please call 1.800.225.7138
or contact us online. |
| |
|
|
|
|
|
|
|
| © Copyright 2005, Accro-Seal, Inc., All Rights Reserved |
 |
|
